Most Common Problems With Yamaha AR230 Boats
The Yamaha AR230 is undoubtedly one of the best of the bunch since its debut in 2003 and it is still holding up that image with the addition of new features and function over the years.
The next new versions from 2007 onwards became the flat-out-bestseller in its class with all those wonderful features and its attractive affordable price tag.
The boat’s innovative design and apt changes over the years has only amplified its demand in the market. Needless to say, Yamaha AR230 remains among the favorites in the genre for the boating families.
About The Yamaha AR230
The classic and comfortable layout of the craft is a sensation in itself. Since being launched in 2003, Yamaha AR230 has gone through various transformations that have enhanced the overall outlook while at the same time improving its performance and efficiency.
With a 4’- deep platform arranged on two levels enables the craft to allow a comfortable and satisfying lounging area. The latest versions have curved and padded vertical surfaces for vertical backrests while the horizontal surfaces are covered in soft Hydroturf material. A wide hatch in the upper platform covers a wet storage compartment and the entire layout is well designed.
Even with such satisfying features and wonderful performance from its engines, there are a few common problems that people face with the Yamaha AR230.
What Are The Common Yamaha AR230 Boats Problems:
1. The Cleanout Plug Issues
If these plugs are not installed properly, they can disengage or worse, blow up while under pressure. This can result in loss of thrust overall. But the problems get much more serious if the plug launches, breaking the engine hatch and goes into the air. Even worse, get caught in the cleanout tube and turning sideways.
This will detach the cleanout tube from the tray and if you apply more throttle for thrust, water gets pumped into the bilge or the engine area!
In order to avoid such mishaps it is necessary or at least advisable to add locks to prevent blowouts. Rebuilding the plugs to help with the removal process is also an option.
2. Fuel sending Unit Problems
It happens that sometimes the fuel or gas gauge does nor show the correct level on the display. Or even at times, the gauge happens to show no level at all.
This is a rather smaller issue and can be dealt by adjusting the level markers on the sender or by replacing the unit entirely.
3. Loose Throttles
Loose throttles can be a problem while operating the boat and often can cause inconveniences while operating it. This results in the throttles not staying in the assigned RPM and keeps slipping away causing an unwanted reduction in the overall RPM.
Now this problem much be dealt by either repairing the throttles or by replacing them entirely. It is also important to notice if there are any other major inconveniences or defects other than loose throttles causing the reduction in the RPM. A rough handling of the throttles can often lead to this problem with loose throttles.
4. Scupper Valve Issues
This is basically the cockpit drain which exits at the the rear of the boat right under the water line. Now this is a plastic fitting that can leak, crack or be broken. In worst case scenarios, this can lead to a leak inside the boat resulting in a 2” hole below the waterline. If ignored such problems can give rise to a real damage to the boat and needles to be acted upon swiftly.
Needless to say, this needs to be repaired and the consequences dealt with. However, it is not always that these fittings are vulnerable to leakage or breakage.
5. The Infamous Floor Rot Issue
Now this problem is undoubtedly among the most annoying ones and a lack of proper maintenance is often what leads to this issue. Nobody wants their dream boat to be facing worst case scenarios owing to the floor rot problem, so it is better to keep a watch for it.
The table leg holder and T-handle latches have rubber gaskets around them, which if not sealed tightly can lead to the horrible consequence of water seeping in and eventually cause the wood between the fiberglass to rot. So precaution is definitely required so that such inconveniences are avoided.
General Pros and Cons of Yamaha AR230 Boats:
Coming from a reputed long-term brand, Yamaha AR230 definitely ranks among the most popular crafts of the series. Despite the few problems discussed in the article, Yamaha Ar230 remains among the most popular and well within reach crafts in the genre.
Pros
- With a stylish outlook, the entire craft is a piece of beauty itself.
- The comfortable interior is well featured
- Price range is rather affordable
- The perfect and assuring support from the boat’s engine developed by Yamaha stands out with its reliable performance
- A decent RPM and easy to fix and install set up procedures
Cons
- Requires a good maintenance and overall attention
- Few fittings may be required to be altered more than one
- Once the warranty runs out, servicing may become an issue
Final Verdict
Yamaha AR230 boats are definitely holding up for a long time now. It is the classy outlook, the comfortable interiors and the perfect support from its engine that has been satisfying customers with outstanding performances.
It is quite natural to face some minor difficulties while operating water crafts and inspite of it few common problems that customers have faced while running this model of the Yamaha series, Yamaha AR230 still ranks among the best and the affordable. With its strong built and efficient functionality, Yamaha AR230 does not disappoint the expectation within a decent price range and boating enthusiasts rank this water craft highly for its apt services.
For the bliss of weekend boatings or simply to enjoy the summer afternoons, Yamaha AR230 will be more than just satisfying. For the passion of water riding, this boat holds its ground firm and strong among the best in the market and it is wroth a shot if the refreshing water ride is what your heart craves.
Related Posts: