4 Symptoms to Detect Exhaust Corrosion on Your Yamaha F225
Regardless of having higher durability, it is common for the corrosion to attack easily in the Yamaha F225, especially in the components like exhaust. When that happens, the situation requires immediate inspections. But what is the symptom to diagnose the corrosion in the exhaust?
Here we are going to answer in short. The main symptom of exhaust corrosion in the Yamaha F225 is overheating at idle. Excessive air bubbling can also signify corrosion build-up in the F255 exhaust.
Not enough of it! There are more specific symptoms through which you can diagnose your exhaust to be corroded. So, stay tuned with us till the end to get to the pinpoint of the matter.
How Do I Get to Know Yamaha F255 Exhaust Corrosion?
The outside of the exhaust system is generally cooled by raw water to prevent overheating.
When the fuel enhanced with ethanol burns out, it creates sulfate salts prone to corrosion in the exhaust system.
As we have already mentioned, we will walk through some of the most common symptoms of the Yamaha F255; let’s proceed.
Symptom 1: Overheat At Idle
The most common symptom that indicates that the exhaust of the Yamaha F225 is corroded is the overheating issue.
When the exhaust is corroded, it does not let the hot gasses pass easily, causing the overheating issue.
Symptom 2: Reduction in Performance or Oil Leaks
If you notice a loss of horsepower in your Yamaha F225 or the engine is struggling while starting, it is most likely due to the exhaust’s corrosion.
The issue is mostly happening when the corrosion becomes excessive. Apart from the overheating, lack of power in the higher RPM bands is the other classic symptom.
In some cases, the corrosion reaches the oil pan, and the oil starts leaking. So, depending on the level of the corrosion, you may also notice oil leaks in your F225.
Symptom 3: Excessive Air Bubbling
Due to the corrosion build-up on the Yamaha F225, the emission of air bubbles from the exhaust is another symptom.
When the engine idles at neutral and does not go away after the warm-up, it emits air bubbles from the exhaust.
Symptom 4: Gradual Engine Failure
In any case, if the corrosion builds up in the exhaust becomes serious, it can lead to the reduction of the engine performance. So, when you notice any sign of the corroded exhaust, either repair or replace it.
How Serious is the Yamaha F225 Exhaust Corrosion Problem?
Corrosion build-up is not something that you can ignore easily. If you leave the corrosion untreated, it will cause a loss of structural integrity.
Besides, degradation can lead to high maintenance costs or early failure of the system. Moreover, engine replacement can be the only option if the corrosion is too advanced.
So, it will be best for you to resolve the corrosion issue on the exhaust of the Yamaha F225 as soon as you notice its symptoms.
What Can I Do to Resolve the Exhaust Corrosion on Yamaha F225?
When you get the assurance of the corroded exhaust in your Yamaha F225, we suggest you consult the experts or get a good mechanic to check.
However, if you want to check the exhaust for corrosion buildup, remove the lower unit first. Then use a light to illuminate the exhaust tube to check for holes or corrosion.
You can take the following steps to see if this can solve the corrosion in the exhaust.
Flash & Clean the Exhaust
The first thing that you can do is to flash the engine for about 15 minutes. It can help to clean the exhaust tube when it is corroded. There are three types of flashing methods. Use any of these methods to flash your F225.
- The flush muff method
- The flush bag method
- Using the built-in flush attachment
You can also clean the exhaust with a soft brush and rub the corrosion. If the corrosion builds up due to the uneven exhaust, you can also try to polish it to prevent the corrosion builds up.
Rebuild or Replace
You may need to rebuild the system if the above method can’t work out to fix the corrosion build-up on the exhaust. Yamaha has a complete kit for this task. You may need to buy this now.
The process is a little critical. So, you should take the help of the experts. However, you can check the steps below if you want to do this.
- Remove the power head of your exhaust system and the lower unit
- Now remove the upper casing from the mountain bracket
- From the upper casing, remove the exhaust system & oil pan
- Disassemble the exhaust system of your F225
- Rebuild the exhaust system & reattach the upper casing to the mountain bracket
Still, if the exhaust system has gone bad due to corrosion, you should get it replaced.
How to Prevent the Exhaust Corrosion Problem on Yamaha F225?
As you see, the exhaust corrosion buildup on the Yamaha F225 is a little tiring. So you may want to prevent the problem even before experiencing it again in the future.
Here are some easy steps for maintenance of the exhaust of the Yamaha F225 that can assist you effectively.
- To prevent corrosion from building up on the Yamaha F225, flush the engine after every use.
- You should flash your engine with fresh and clean water for about 15 minutes. It is a vital part of preventing corrosion on the Yamaha F225. It will help the cooling system to work at its maximum efficiency. Because clean and cool water will minimize the heat inside the engine.
- Besides, you should set up a regular maintenance schedule for your Yamaha F225.
- Have a visual inspection of your F225 at the scheduled time. If unsure when and what to do, contact your authorized Yamaha F225 manufacturer.
Frequently Asked Questions
By now, we hope you have gained a clear idea about the Yamaha F225 exhaust corrosion symptoms and some important information. While strolling through the different Yamaha F225 forums, we know some of the most searched queries. Here are the answers to some of those.
How many hours will a Yamaha 225 outboard last?
As Yamaha is at its excellence in design and engineering, it also offers a longer longevity of the outboards. In general, the Yamaha F225 can last up to 1500 to 3500 hours before requiring repair or replacement.
Do Yamaha 225 motors have hour meters?
The standard hour meter is essential for logging the Yamaha engine. This standard hour meter is installed in minutes and connected to the engine compartment of your Yamaha. Every two strokes and four strokes can have the hour meters.
How often do you change the timing belt on a Yamaha F225 outboard?
According to the manufacturer of the Yamaha F225, you should replace the timing belt every 1000 hours. They recommend inspecting the timing belt every 100 hours and replacing the belt when the timing belt gets damaged in your F225.
How many hours is a lot on a Yamaha F225 outboard?
If the Yamaha F225 is well maintained and is not abused, you can have a wide-ranging life expectancy. According to the thread’s reviews, it can last 1500 to 2000 hours.
How much fuel does a Yamaha 225 HP outboard use?
When a 225-horsepower outboard engine like Yamaha runs at full throttle, it will use about 22.5 gallons per hour.
Final Words
In conclusion, engine overheating can be caused by a range of factors, from simple issues like low coolant levels to more complex problems like malfunctioning thermostats or damaged head gaskets. Regular maintenance and prompt attention to any warning signs can help prevent engine overheating and extend the life of your vehicle. If you are experiencing engine overheating, it is recommended to consult a professional mechanic for a proper diagnosis and repair to avoid costly damage or breakdowns on the road.
- Read Also: How To Detect A Blown Lower Unit On Outboard? (Explained)
- Read Also: What Are the Signs & Symptoms of a Bad Clutch Dog?
- Read Also: What Are the Signs & Symptoms of a Bad Primer Solenoid?
- Read Also: Outboard Timing Symptoms: Boat Owners Should Keep in Mind
- Read Also: What Are The Signs & Symptoms Of Bent Boat Trailer Axle?