Angler Boat Reviews: Are They Good And Reliable?

Angler Boat Corporation, which sells hand-assembled watercraft with fiberglass hulls, offers its hand-assembled watercraft for sale at mass-produced pricing. Angler Boats may be configured for fishing or law enforcement and are suitable for both individual and commercial customers. Angler Boats provide a wide selection of outboard engine options.

Are these boats, however, reliable? Is it worth your money to invest in these boats?

How Good Angler Boats Are?

Angler boats are manufactured by Austral Marine, which was founded in 1998. It has been established with tremendous work and attention from the beginning, with the singular objective of offering solutions with the highest level of professional services.

Angler Boat Corporation is a small, modest enterprise with a long history in South Florida. It spends relatively little money on promotion and marketing, yet it regularly sells a large number of boat year after year.

How Reliable Are Angler Boats?

The Angler Boats are designed and manufactured with fishing in mind. Each Angler boat is backed by a limited lifetime hull guarantee and comes with a lot of development and production experience.

Angler Boats’ commitment to research and development ensures that they will remain at the forefront of boat construction technology. For the past years, Angler has been under the same ownership and management. Angler Boat is one of the few surviving major independent boat makers.

Depending on your desire, the boats may accommodate either a single or twin outboard motor. Any category will have ample flotation, and the hull will provide a smooth, pleasant ride in tolerable offshore conditions.

How Durable Are Angler Boats?

The Angler Boat has been designed to be completely devoid of wood, allowing you to avoid long-term issues with rotting wood. Reducing the amount of time spent on upkeep frees up more time for fishing.

An Angler is a handcrafted boat at a mass-market price. The Boats also does not employ mass production techniques; instead, the company’s boats are still hand-built utilizing the best hand-laid fiberglass matting as an alternative to the sprayed chopped strand seen in many other mass-produced boat hulls.

Hand-poured fiberglass allows for a significantly better and far stronger boat hull, even though it takes more time and is more labor demanding. This is the mindset that distinguishes an Angler Boat from others.

What About Older Angler Boats?

The Angler 204 FX is one of the most cost-effective center consoles available. This is a narrower-beamed boat with a strong ride, measuring 20’4″ by 8′.

Angler doesn’t have a lot of features, which I think is a good thing: there aren’t a lot of bells and whistles to break. Its sturdy build and straightforward configuration make it a simple boat to maintain and operate.

In the front, the Angler 2700CC keeps up with its bigger sister, 2900. Angler Boats’ popular 27-foot hull has been rebuilt, and the new Angler 2700CC, a deep-vee designed for blue water, is the result. All design alterations, except for the integrated platform, are focused on fishing.

Morning Star M460 Angler set out to create an aluminum plate boat with the smooth ride and look of a fiberglass boat. It’s not every day that major advancements in boat hull design occur.

Do They Still Make Parts For Older Models?

I have some wonderful news for you if you possess an old Angler boat. Angler offers a variety of boat accessories. Boat compass, aft curtain, hull decals, ratchet cover, open box poles, straps, Bimini top, and other accessories are available.

Angler Marine takes pleasure in offering a large assortment of boat parts and accessories to their clients. They have over 6,500 different components in stock right now, and they’re continually adding to it! The organization wants to be of assistance in finding any boat parts or accessories you may require.

You can visit their Parts page to look at all of the older model parts available for you to buy.

What Are Typical Problems With Angler Boats?

There have been a few forum posts discussing issues that consumers have encountered when utilizing their Angler boats.

Some buyers complained that the fittings and hardware were constructed of low-cost materials. Metal fittings and polymers were both deemed to be less durable.

If you operate your boat for a long time, the wiring may corrode. Some users have reported that corrosion at the rear of the external fuse panel forced them to repair the wiring in their boat.

Although one user did not find any fractures, he noted that the welding was poor. The bow rail and leaning posts were significantly improved.

Some individuals have also complained that, despite the ample storage, the batteries, pumps, and seacocks at the stern were difficult to access. Angler has been studying consumer feedback and working to improve the quality of its goods.

How Long Do Angler Boats Last Compare To Similar Brands?

If you take good care of your Angler boat, it will endure a long time. However, because the firm offers economical boats at a low price, you should not anticipate the boat to survive longer than 20 years.

A five-year structural limited warranty is provided by the firm. As a result, you can expect to sail and fish for a long period.

Angler boats are built to last as long as, if not longer than, their competitors. Angler offers a warranty policy that covers all of its products.

As a result, I am convinced that your Angler fishing boat will serve you well for more than a decade.

Do Angler Boats Hold Their Value?

Angler boats appear to be less expensive than their competitors’ boats. The boats are inexpensive since they are made for beginners. As a result, they have a low resale value.

The price of the 2005 Angler 2900 CC boat is $57,990. A large depreciation cost will be there if you acquire or sell a secondhand boat of the same model.

The 2002 Angler Central Console boat is available for $74,000. In addition, the 2003 Angler 2900 is on the market for $37,500.

You may go to the Boat Trader website to have a more in-depth look at the resale value of Angler boats.

Are Angler Boats Still Being Made?

Angler boats are still being made to this date. They have a total of 2 lines of boats. Each line has its specialty. These are the Odyssey and the Panache.

There are 6 models available in the Odyssey lineup. These are the Odyssey 19 Offshore, Odyssey 19 CC, Odyssey 650, Odyssey 650 Stern Drive, Odyssey 720, Odyssey720 Sterndrive. Their Panache lineup has 3 models. These are the Panache 1950, Panache 2250, and Panache 2250 Stern Drive.

These are the boats that are currently officially available from Angler. You can also buy their older models from different websites and dealers. You can find the nearest dealer by using their Dealer page.

You can also have a detailed look at all of their current models on their website through this link.

Customer Reviews On Angler Boats

Angler boats have been providing excellent service to their clients for over 23 years. Although the firm is not well-known, it has received both positive and negative feedback on several forums and blogs. Here are some customer testimonials for Angler boats.

“I own a 2006 Angler 24 CC. It has been slipped in saltwater every year since for 7 months a year. It has been holding up pretty well with minimal maintenance. It is waxed once a year before it goes in the water washed with boat soap at least once a month and freshwater rinse after every use.

No construction problems at all. No cracks, loose screws or fittings, etc. Other than normal maintenance, the only thing I’ve repaired was a leak in the steering.”Jim B from The Hull Truth.

“I have the 204 FX center console. I bought it new in 2008. The Yamaha 150 4x pushes the boat to about 40 mph. It is a good low-cost boat, a high, dry, stable ride. There is a lot of boat for the money. Trim tabs are a good option. Love the boat. At 2200 lbs. is a good weight for the hull. A lot of ’20s are lighter”Joe009 from A Hull Truth.

“I read the good and bad about these boats and decided to go ahead and take the plunge. So far, glad I did. I bought a 2004 angler eagle, and it rides great. I use it on the gulf of Mexico launching out of Gulfport, MS. It’s powered by a 150 Merc and has enough power to get on a plane quickly. I called the company in Miami and the salespeople there gave me the whole scoop on the boat, why they quit making the eagle and answered all concerns I had. Hopefully, I stay happy with it. There is not a lot of information about the Angler Eagle, but just do what I did. Take a test ride on a rough day and enjoy the ride.” From Dr. M.

There are a few drawbacks with Angler boats that should not be neglected. Some people have claimed that their steering has leaks. There were also several complaints that the boat was overly wet. As a result, the company’s boats have received mixed reviews.

Final Thoughts

Angler boat builders specialize in creating one-of-a-kind and customized sports-fisherman boats. They take pleasure in providing top-of-the-line quality and design to the world’s top sports fishermen. Angler boats are ready to go on fishing days. Each hull is skillfully designed to produce a notably smooth ride, with wide-open spaces for rigging and resting. It is now up to you to determine whether or not you wish to purchase an Angler boat.

Related Posts: